11/14/2011 - FAGOR ARRASATE CELEBRATES ITS FOURTH INTERNATIONAL CONVENTION The 4th Internation Convention of Fagor Arrasate, celebrated in the headquarters of the company in Mondragon during the 9th and 10th of November 10/17/2011 - BENGANG STEEL PLATES SHOWS ITS GREAT SATISFACTION ABOUT THE PROJECT WITH FAGOR ARRASATE Fagor Arrasate delivers a tension leveling line with degreasing section for stainless steel 10/12/2011 - TKAS ORDERS A NEW CUT TO LENGTH TKAS, the company belonging to ThyssenKrupp and Angang , in China, has awarded FAGOR with an order to supply, manufacture and supply a trapezoid’s Cut to length line 10/07/2011 - FAGOR SELLS A BIG PRESS TANDEM LINE IN RUSSIA GESTAMP SERVERSTAL KALUGA has awarded FAGOR ARRASATE with an order to design, manufacture and supply a big robotized press tandem line 10/05/2011 - FAGOR ARRASATE IS AWARDED WITH AN ORDER FROM SALZGITTER An order to design and supply a complete packaging line for blank’s bundles of very thick blanks 09/06/2011 - Fagor Arrasate in the SHANGHAI’S METALFORMING From 23rd to 25th of August, it was celebrated in Shanghai the conference METALFORMING in what FAGORARRASATE was a special guest as a Diamond Sponsor 09/02/2011 - Transformados MAYO orders a transfer press An important Spanish Stamper has ordered a 2000 ton transfer press for its facility in Navarra.
08/31/2011 - Volkswagen trusts once again in Fagor Arrasate The Wolfsburg located German car maker has awarded FAGOR ARRASATE with an important order of a stamping system aimed to manufacture wheels 07/14/2011 - Baosteel choose Fagor Arrasate supplier of its new Blanking Line The new blanking line will have an advanced leveler, a press with a capacity of 6300 KN, an electromagnetic stacker with two stations..
07/05/2011 - Fagor Arrasate will install a great transfer press The FAGOR electronic transfer will have a programmable pitch up to 1300 mm and a lifting motion of 300 mm.
07/01/2011 - Fagor Arrasate is awarded by VOLKSWAGEN to supply one of the most advances robotized press line of the world he automation is based on the new KUKA special robot named COBRA that allow the above mentioned synchronized processing 06/23/2011 - Fagor Arrasate will install a slitting line in an important Turkish Service Center Fagor Arrasate has been awarded by an important Turkish Service Center with an order to design, manufacture and install a new slitting line able to process very high strength steel in widths up to 600 mm and thickness up to 5 mm.
06/20/2011 - Fagor Arrasate sells a transfer press in Germany German company GKN Driveline Trier has awarded FAGOR ARRASATE with an order for a transfer press with a capacity of 500 ton 06/01/2011 - Fagor Arrasate will supply a dividing and recoiling line to KNAUF GROUP This line will process steel of up to 600 MPa in widths of 1550 mm and maximum thickness of 5 mm. The coil weight will be 30 ton 05/27/2011 - EDSCHA awards FAGOR ARRASATE with an order It is a 400 Tons press, 2 connecting links, 2100 x 1200 mm in size. The stroke is automatically variable, from 20 to 200 mm. 05/24/2011 - UMICORE trusts of FAGOR to modernize its cleaning and degreasing line This line will process strip of 1.75 mm in thickness and 1350 mm in width at 50 m/min with tension levelling operation 05/20/2011 - Company Journal 1st semester 2011 Fagor Arrasate publishes its new Company Journal. In his issue, some very interesting articles are included. So, the one about the new FAGOR servopresses, a complete and extensive analysis about the advantages of stretch levelling 05/15/2011 - Fagor Arrasate will supply three Blanking Lines to Gonvarri Steel Industries Has been awarded by Gonvari Steel Industries as supplier of three new press blanking lines that will be installed in the facilities of Mexico and Romania