February 19, 2012

AN IMPORTANTE ORDER OF COIL CUTTING LINES FROM ERDEMIR IN TURKEY

FAGOR will install three big coil cutting lines to process steel in Turkey

Fagor Arrasate event: AN IMPORTANTE ORDER OF COIL CUTTING LINES FROM ERDEMIR IN TURKEY

ERDEMIR, the big Steel manufacturer in Turkey has trusted on FAGOR ARRASATE for the equipment aimed to is new expansion in the country. Specifically, FAGOR will install three big coil cutting lines to process steel.

The first one will be a cut-to-length line to process high strength steel in coils of 1525 mm in width and thickness up to 3.5 mm. This line will be able to cut blanks of 6 meters long and will run at high speed, producing 180 blanks per minute.
 
Secondly, a slitting line,  also for coils of 1525 mm in width and 3.5 mm in thickness. This line can run at 300 m/min and has an automatic quick change of the cutting tooling as well as a system to take out the cut coils without having the necessity of strapping them first.
Finally, the third line will be a multiblanking line  able to cut coils of 2 mm in thickness and 4 blanks at the same time that, in this case, can be 8 meters long. The line will run at 80 m/min and will be able to cut 560 blanks per minute, a number that shows how productive FAGOR lines are.