Cold Forging Mechanical Presses

FAGOR ARRASATE designs and manufactures cold forging mechanical presses, for both cold extrusion and calibrating operations.

Depending on the case the cold forging mechanical press can be driven by a knuckle joint or an eccentric drive type, each of the drives are more suitable depending on the speed or the required application point of the forging process.

This makes knuckle joint presses generally more suitable for processes where you wish to start forging from a higher point or where a slow speed is required near the BDC. On the other hand, presses with eccentric kinematic chains are presses with simpler geometry compared to knuckle joints, and also allow the transfer more time to move the parts.

With regard to mechanical cold forging presses, we must not forget calibrating presses, which are the ideal replacement for traditional hydraulic calibrating presses. Among the many advantages of mechanical calibration presses over hydraulic ones is the ability to multiply the working rate.

Sectors Forging Automotive

Technologies Mechanical presses

Technical specifications

Eccentric Presses

		TSEMF1-500	TSEMF1-800	TSEF2-1000	TSEF2-1200	TSEF2-1600	TSEF2-2000
Nominal force	ton	500	800	1,000	1,200	1,600	2,000
Slide stroke	mm	250-500	300-500	300-630	300-630	600-800	600-800
Bed dimensions	l x b, mm	1,000 x 800	1,000 x 800	1,500 x 1,000	1,500 x 1,000	2,000 x 1,500	2,300 x 1,500

Values of the table above just for reference, other forging presses can be manufactured on request.

Knuckle Joint Presses

		TLEMF1-500	TLEMF1-800	TLEF2-1000	TLEF2-1200	TLEF2-1600	TLEF2-2000	TLEF2-2500
Nominal force	ton	500	800	1,000	1,200	1,600	2,000	2,500
Slide stroke	mm	250-500	300-500	300-630	300-630	600-800	600-800	600-900
Bed dimensions	l x b, mm	1,000 x 800	1,000 x 800	1,500 x 800	1,500 x 1,000	2,000 x 1,000	2,300 x 1,100	2,500 x 1,200