Refrigerator part manufacturing lines

At FAGOR ARRASATE we are specialists in the design, manufacture and installation of equipment for the manufacture of different refrigerator parts:

  • Depending on the customer’s needs and preferences, the profiles can be shaped by interpolated bending, partial roll forming + 90º bending or roll forming.
  • Very flexible lines, with model change in cycle time and with the possibility of producing a wide range of products on the same line.
  • Possibility to integrate automatic assembly processes of the cabinet components: Back panel, Deck, Front rail, Mullion, Liner, Reinforcements, Automatic loading and wrapping of skin condenser, etc.
  • We are highly specialised in this product, with lots of experience and a wide range of solutions: automatic lines, flexible cells and stamping solutions with presses + dies.
  • Vast experience in the production of all types of doors that are currently on the market: fitted, clinched, welded, etc.
  • The high aesthetic requirements of this product are guaranteed for all types of materials (stainless steel, pre-painted, VCM, black steel).
  • We offer different solutions that allow doors to be produced one by one, 2 doors of the same format and sets of up to 4 doors starting from 4 different formats with model changes in cycle.
  • Among the different line options, there are solutions for automatic stacking, automatic component assembly, sealant application, dimensional part control.
  • Depending on the needs and preferences of the customer, we offer the possibility of forming profiles using roll forming, partial roll forming + 90º bending or interpolated bending.
  • Among the different line options, there are solutions for automatic stacking, automatic component assembly, sealant application, dimensional part control.
  • By combining interpolated and servo-driven folding machines, the solution that best suits the specific needs of the project can be offered.
  • The high aesthetic requirements of this product are guaranteed for all types of materials (stainless steel, pre-painted, VCM, Black Steel).
  • Automatic tool changes on folding machines allow roofs of different widths and depths to be manufactured by quickly changing models.
  • Among the different line options, there are solutions for automatic stacking, automatic component assembly, sealant application, dimensional part control.
  • Depending on the customer’s needs, it is possible to produce side panels and roofs in a single line, making sets of 2 side panels and 1 roof with automatic changes within the cycle time.
  • Bottoms, bases and mullions lines.
  • Liner punching line.

Sectors Home Appliances

Technologies Bending

Contact us for more information on refrigerator manufacturing lines! →

CONTACT US

FULLY ELECTRIC AUTOMATIC LINE FOR REFRIGERATOR SIDE PANELS: HIGH PRODUCTIVITY AND FLEXIBILITY

The line is completely electric, without hydraulic systems, and has different automatisms that offer high productivity combined with great flexibility to change production easily and quickly. The production starts from pre-cut blanks and performs the notching and punching operations before carrying out the longitudinal and transversal bending process by means of interpolated folding machines. At the end of the line there is an automatic robotized station for sealing the front and rear top corners.

FAGOR ARRASATE - Proyectos y retos tangibles

Increased productivity

Compared to standard press brakes thanks to very short cycle times of 10 seconds.

FAGOR ARRASATE - Investigación

Handle parts

No need to handle parts from one machine to another, all necessary operations are performed on a single line.

FAGOR ARRASATE - Calendario y horario flexible

Total flexibility

Flexibility to add new models when needed.

FAGOR ARRASATE - Posibilidad de innovar

Very fast changeover

Fast changeover from one model to another and in fully automatic mode.

Batería

Fully electric line

No hydraulic systems. Greater control, lower consumption and no oil management required.

FAGOR ARRASATE - Proyectos y retos tangibles

Increased productivity

Compared to standard press brakes thanks to very short cycle times of 10 seconds.

FAGOR ARRASATE - Investigación

Handle parts

No need to handle parts from one machine to another, all necessary operations are performed on a single line.

FAGOR ARRASATE - Calendario y horario flexible

Total flexibility

Flexibility to add new models when needed.

FAGOR ARRASATE - Posibilidad de innovar

Very fast changeover

Fast changeover from one model to another and in fully automatic mode.

Batería

Fully electric line

No hydraulic systems. Greater control, lower consumption and no oil management required.

Technical specification

LINE CAPACITY

LINE DIMENSIONS LENGTH WIDTH PANEL HEIGHT SHEET THICKNESS
Minimum 1200mm / 47.2in 500mm / 19.6in 20mm / 0.7in 0.35mm / 0.013in
Maximum 2050mm / 80.7in 750mm / 29.5in 35mm / 1.3in 0.5mm / 0.019in

MATERIAL TO BE PROCESSED

No. TYPE OF MATERIAL THICKNESS (Without protection film) ESPESOR (With protection film)
1 PCM 0.5 / 0.02 0.52 - 0.54
2 PET  0.5 / 0.02 0.52 - 0.54
3 Cold rolled 0.4mm - 0.6mm (0.015in - 0.02in) ---
4 Coated coil  0.4mm - 0.6mm (0.015in - 0.02in) ---
5 Galvanized sealed  0.4mm - 0.6mm (0.015in - 0.02in) ---

BLANK CHARACTERISTICS

PRODUCTION

Width tolerance -0 / +2 mm
Length tolerance -0 / +2 mm
Max. tolerance of nominal thickness ± %5
CYCLE TIME Performance / Uptime Estimated total No. of required operators
10 seconds per unit at 100% > 95% 1 line operator to unload final parts

FULLY AUTOMATIC CHANGEOVER TIME FROM MODEL TO MODEL
0 seconds time loose (changeover within cycle time)

Contact

company logo Fagor Arrasate

Are you looking for something else?

You can’t find what you are looking for?

Get in touch