Home / Soluciones / Inspection and rewinding lines
An inspection line is a line that allows metre-by-metre control of the quality of a coil over its entire length and correction of bad areas, in order to ensure the consistent good quality of all material shipped to the end users.
The inspection line checks the coil; to do so it is uncoiled and checked, any defects are eliminated, and lastly it is coiled up again, ensuring the perfect quality of the final coil.
Moreover, taking advantage of the process, a central cut can be made in order to obtain two narrower coils from one wide ‘mother’ coil.
The main benefits of our inspection and rewinding lines are:
Based on the basic needs of inspection of the coil, it is possible to include multiple performance in the line to fulfil the desired requirements:
Inspection cabin to allow easy detection of coil defects by operators
Automatic measurement of thickness
Automatic measurement of width
Automatic oiling of the strip
Edge trimming to remove the edges of the entry coil that can be damaged
Laser welding unit in order to rejoin the strip, once the damaged parts have been removed
Automatic strip marking and coding
Elimination of burrs produced during the cut
High speed cropping of damaged areas with a high-speed rotary shear
Complete automation, created and developed by FAGOR ARRASATE. Level 2
Automatic cycles for time reduction. (coil loading, feeding and banding on the line, removal and strapping of coils, etc.).
Possibility of central cutting.
Choppers for the removal of the cut edge on the belt.
High-precision belt guidance via Steering Roll.
Inspection areas, horizontal or vertical.
All lines meet the most demanding EC, OSHA, etc. standards.
Proccesing and cutting lines
You will receive an email with the link to download the file. If you don't receive it, please look in the spam folder